Calcavia

Free calculators & converters

Math

Roofing Calculator

Roof area from the building's footprint and roof pitch, plus how many roof tiles, shingle bundles or square metres of sheeting you need, ridge and edge lengths, and cost

Roof shape

Outside wall to outside wall

The side the roof slopes across

How far the roof sticks out past each wall; 0 if none

Check the tile maker's figure; concrete tiles are often about 10 per m² (0.93 per ft²)

Extra for cuts and overlaps: about 10% for gable, 15% for hip roofs

How roof area is calculated

A sloped roof is larger than the floor it covers. Multiply the footprint (including the overhang) by the slope factor, 1 ÷ cos(pitch): at 35° every square metre of footprint needs 1.22 m² of roof. For a gable, hip or shed roof with the same pitch on every slope this gives the whole roof area; dormers, valleys and different pitches need to be measured separately.

Pitch is given as an angle in degrees (common in Europe), as rise per 12 units of run (US: a 6/12 roof rises 6 inches per foot, ≈ 26.6°), or as a percentage. In the US roofing is sold by the square, 100 ft² of roof, and asphalt shingles usually come 3 bundles per square.

Add waste for cuts, overlaps and starter rows, and always check the manufacturer's coverage and minimum pitch. Underlayment, battens, ridge caps and flashing are extra.